Bar and Wire Rod Mill Production Line
50000-300000 tons of bar and wire rod mill production line, 8-32mm of full continuous rolling production line, is common carbon steel, excellent carbon structural steel and low alloy steel; the designed annual production capacity is 50000-300000 tons, and the large line speed of finishing mill is 5-16m / s.
1. Billets: 100 × 100 -- 150 × 150 continuous casting billets with a length of 3000mm -- 6000mm are provided by the internal steel-making and continuous casting workshop of the company.
2. A new regenerative pusher reheating furnace will be built for the whole continuous rolling mill production line. The fuel is blast furnace gas and the air will be preheated by single preheating. The hourly heating capacity is 40-80t / h, end in and side out, a single row of cloth, which can meet the requirements of 50000-300000 tons of rolling material per year. The inner chamber size of the reheating furnace is 6.6x24m.
3. 16 rolling mills are adopted, which are divided into roughing mill, intermediate mill and finishing mill, forming the whole continuous rolling production line, with the layout of 6 + 6 + 4 horizontal and vertical alternation, and the main drive of rolling mill is controlled by full digital PLC. Micro tension continuous rolling is adopted for rough rolling and medium rolling. There is one side looper in the middle of medium rolling and finishing rolling, and there is a vertical looper between each rolling mill of finishing the rolling unit, forming no tension and no torsion rolling. The high speed of the rolling mill can reach 5-16m / s.
4. Three flying shears are set on the rolling line, which is located behind the three units and is respectively used for cutting head, accident breaking and finished product multiple length sections. The structure of scissors is crank type, rotary type, and crank rotary combination.
5. Rolling process: round 6.5mm, threaded steel 8-32mm. The annual output of 50000-300000 tons of material requires 330000 tons of continuous casting slab, and the comprehensive yield is 98% (negative deviation is considered).
6. Controlled rolling water piercing cooling device is set in front of the finishing mill and a controlled cooling water piercing device is set behind the finishing mill to produce high-strength steel bars (grade III steel) and improve the mechanical properties of the products.
7. Semi-automatic packing equipment and 50t cold shear are used in the finishing collection area.
8. The control system adopts computer secondary control, which is divided into four areas (heating furnace area, rolling area, controlled cooling area, and finishing area), and each control point is controlled in a decentralized and centralized way.
Production Process and Product Structure
It adopts the international advanced equipment and advanced production technology: the heating furnace is a walking beam type, adopts the double regenerative high air temperature combustion technology of energy saving and environmental protection, and uses the blast furnace gas with low calorific value as fuel, which can greatly reduce the fuel consumption, with the characteristics of fast heating speed and good heating quality.
There are 18 rolling mills in the whole line. In order to ensure the dimensional accuracy of the products, 6 loopers are set in the finishing mill room, and the water-cooling device is set after finishing rolling, which can realize the torsion-free controlled rolling of the whole line. In the production of φ 10 ~ φ 16 threaded steel, three-section rolling is used; in the production of φ 18 ~ φ 22 threaded steel, two-section rolling technology is used. Among them, φ 22 two slitting rollings is a domestic innovation, and the family has this technology, and the slitting rolling capacity is at the first level in China. The main drive of the rolling line adopts the full digital control DC motor, which can realize the automatic operation of the whole line, and the large rolling speed can reach 18 m / s. The raw materials used are continuous casting billets, all supplied by hot delivery.
The main product specifications include national standard II, national standard III, British standard, Japanese standard, plus standard Φ 10 - Φ 40 straight thread steel and round steel of various specifications.
Production steel includes ordinary carbon structural steel, excellent carbon structural steel, low alloy steel, etc. All products are delivered in straight condition.
Please contact
stella@hanrm.com for quotation.
And free send inquiry to us.
Whatsapp/Wechat:+8615877652925
Website:
https://www.hanrm.com
More News You May Interesting:
Morgan Wire Rod Mill
Crank Type Flying Shear
Why does the Steel Bar Bend after being Cut by Flying Shear?
Technological Features of Continuous Billet Cater
Headless Welding Rolling Process
Bar Rolling Mills Water Cooling Technology
How to Improve the Thermal Efficiency of the Reheating Furnaces？
Causes of Surface Cracks in High-Speed Wire Rod Rolling Mill
What is Slit Rolling?
Causes and Solution of Steel Piling-up in High-speed Wire Rod Rolling Mills?
Bar Automatic Counting System
Rolling Mill Pass Design
