Precautions for the Use of Automatic Wire Drawing Machine
The automatic wire drawing machine is suitable for surface drawing and sweeping treatment of copper, iron, stainless steel, etc., and is widely used in various industries such as machinery, automobiles, and hardware parts.
In order to help you use the automatic wire drawing machine correctly, YF Metal Tech summarizes some precautions for using the automatic wire drawing machine, let’s have a look together.
1. Before operating the automatic wire drawing machine, you need to check the power supply and keep it intact. The specific process of safe start-up of the automatic wire drawing machine is to connect the external power supply first, then turn on the main power switch of the equipment, and finally start the power switch of the equipment.
2. Make sure to check the exhaust port of the body motor before work, and make sure it is unobstructed.
3. Carry out a safety inspection on the automatic wire drawing machine before work, and let the wire drawing machine run idly. In addition, it is also necessary to check whether the fasteners of each part are loose to ensure safe production.
4. During the working process of the automatic wire drawing machine, you should always check whether the impeller and the motor connecting rod are loose, which is conducive to finding problems in time, and can work after adjustment, so as to ensure the safety of personnel in production.
5. When replacing the impeller of the automatic wire drawing machine, the power should be turned off first, and after the power is replaced, check whether the equipment is normal.
6. If it is found that the automatic wire drawing machine is working abnormally, it should stop working immediately and check the equipment. If the problem cannot be solved, find a maintenance worker in time for repair.
7. It is forbidden to extend any part of your body into the polishing area when the automatic wire drawing machine is working automatically to prevent injuries.
8. When the polishing machine is working, if there is an emergency, the main power switch should be turned off immediately.
9. At the working site of the automatic wire drawing machine, it is necessary to keep the ground clean and tidy, and not to place objects randomly.
10. The motor should be maintained regularly, and the bed dust should be cleaned every Saturday, and the motor should be maintained, so as to ensure the normal operation of the wire drawing machine equipment.
11. It is not allowed to randomly connect and pull wires at random. When cleaning or cleaning the equipment, water should be prevented from splashing on the power supply.
12. Non-staff personnel should not enter the work area without authorization to avoid danger.
The above content is organized by YF Metal Tech.
YF Metal Tech focuses on the R&D and manufacturing of wire drawing machines and polishing machines. Currently, it provides automatic wire drawing machines, planar wire drawing machines, plate wire drawing machines, water mill wire drawing machines, round tube wire drawing machines, stainless steel wire drawing machines, and other equipment. Welcome to consult.
More Articles You May Interesting:
What is a Metal Drawing Machine?
