 |
| Cardan Shaft |
How to Install Cardan Shaft?
1, When installing the cardan shaft, should check the product type on the specification model, and clear the flanges of cardan shaft .
2, For the cardan shaft with length compensation, should check the two ends of the forkhead phase, not at the same time, should be corrected by changing the position of the spline teeth.
3, When install, must not hammer the joint bearing.
4. Flange connecting bolts can only be worn from the flange end of the joint, the NUT is screwed by the flange side of the cardan shaft, and if the space of the joint is restricted, the double head bolts can be selected (except for special requirements).
5, Flange connection should use 10.9 class high-strength bolts and 10 high strength nut, twist the nut before the thread part of the bolt and daub a little grease.
6, Bolts, nuts need to have reliable measures to prevent loose.
7, When install should pay more attention to prevent the internal spline slips off.
8, In the possible cause of the operation of the cardan shaft caused by the damage of the site to add a universal shaft protective cover.
Hani Tech is a Hot Rolling Mill manufacturing company working mainly in the area of the bar and wire rod mills, high-speed wire rod mills, high-speed rebar rolling mills, TMT rolling mills, flying shear, cold strip rolling mill, reheating furnace, induction furnace, intermediate frequency furnace, electric arc furnace, ladle refining furnace, blast furnace, continuous casting machine.
We can supply designing, manufacturing, installation, and commissioning for your requirements about rolling mill plant with a “turn-key” service.
Hani is the one-stop supplier able to design, manufacture, install and commission your hot rolling mill plant from A to Z.
Please contact stella@hanrm.com for a quotation.
And free send inquiry to us.
Whatsapp/Wechat:+8615877652925
More News You May Interesting:
